Body Shaping – CoolSculpting Or UltraShape?

Want to lose out on those extra fat inches? Then, you are probably planning on undergoing a fat reduction treatment. But, with the multiple of options available, which option would you choose? If you ask us, instead of surgical options, we will ask you to undergo a non-invasive procedure that is safe and equally effective. CoolSculpting and UltraShape are two such non-invasive procedures that you must choose from.

CoolSculpting

CoolSculpting is a non-invasive procedure in which the body is exposed to extreme cold so as to freeze the fat cells and break them down into fragments, which can then be easily eliminated out of the body through natural processes. It eliminates 24% fat using a CoolSculpting applicator to freeze the fat cells.

Procedure – Controlled cooling is targeted on the area to be treated to kill only the fat cells in the area. An applicator is used with suction to pull enough pinchable fat into the device so that it can be frozen. After one session ranging from 35-45 minutes, the applicator is removed to demonstrate a firm stick-of-butter like frozen skin block protruding from the body. The area is then massaged for 2 minutes to help the fat melt back into the body. As the fat melts, the protrusion vanishes away, leaving a red area. In the weeks that follow, the body will naturally process the fat and eliminate the dead fat cells. Because the fat cells are gone for good, CoolSculpting proves to have long-term results.

UltraShape

UltraShape is a non-invasive procedure where ultrasound technology is used to destroy fat in three in-office treatments, where there is no bruising, no swelling, and no redness involved. It is fast and can cover larger targeted areas to reduce fat. It eliminates 32% fat layer reduction using a painless fat destruction device.

Procedure – A series of photos and measurements will be taken to track the essential information of your target areas. Pulsed focused ultrasound energy will then be used to produce a warm mild tingling sensation on the skin, which will destroy the fat cells. It will take somewhere between 30 to 60 minutes to treat an area. You will start seeing improvements within 10-14 days of your first treatment session; and you could get back to your normal daily activities almost immediately after the treatment. You may need around three sessions of UltraShape treatment for the best results. Speaking of side effects, there could be a slight swelling or redness in the treated area, but it will resolve on its own within few hours of treatment. There is no effect in the surrounding nerves and tissues, making the procedure absolutely safe.

Both the procedures have the same results, with the only difference being in the way they work. While CoolSculpting uses a freezing procedure and targets pinchable fat, UltraShape uses ultrasound technology to target even the non-pinchable subcutaneous fat. If you decide on undergoing any of these procedures, it is always better to get a consultation first. Approach a professional who will check your body and skin thoroughly to help you know whether you are a good candidate for such procedures or not. Undergo these procedures only if they are safe for you. And, the best place where you can have such body shaping treatment in Mumbai performed on your body is at Dr. Marwah’s Clinic, which is an expert for both CoolSculpting and UltraShape.

Contact Us Today!

[wpforms id="2715" title="false"]


Copyright

Copyright © 2019 Dr Marwah’s Clinic | All Rights Reserved.

Powered By The Social Lions

Contact

[email protected]

Contact: 74004 55554

Andheri : 022-26204416, 022-26705353, +91-9118051805 (Mon-Sat 10AM–7:30PM, Sunday Closed)

Oshiwara : 022-49767715, +91-9118961896 (Mon-Sat 10AM–7:30PM, Sunday Closed)

Bandra: +91-7710942222, +91-9967051996 (Mon-Sat 10AM–7:00PM, Sunday Closed)